Inquiry Basket (
Home » Product List » Wheel Loader » Wheel Loader (CG958H) CE
Product Details
Wheel Loader (CG958H) CE
| Model NO.: | CG958H |
|---|---|
| Standard: | 3.1m bucket; 164 kw; US Cummins engine; ZF trans |
| Trademark: | CHENGGONG, CG |
Product Description
CG958H achieved the certificate of CE and fulfill the requirement of TIER III and EPA.
| Overall Data | |
| Operating Mass | 18000kg |
| Rated Bucket Capacity | 3.1m 3 |
| Rated Load | 5000kg |
| Maximum traction | 165kN |
| Grade Ability | 30 0 |
| Breakout Force | 180kN |
| Static tipping load (full 35 0 turn) | >10000kg |
| Wheelbase | 3360±30mm |
| Center line of rear axle to hitch | 1690mm |
| Ground clearance | 440±20mm |
| Hinge pin height at carry position | 550mm |
| Maximum rollback at ground | 40.4º |
| Maximum rollback at carry position | 47.5º |
| Maximum dump height | 3132±50mm |
| Hinge pin height at full lift | 4200mm |
| Turning radius | 6400mm |
| Maximum overall height | 5534mm |
| Maximum rollback at full height | 56.5º |
| Bucket dump at full height | 45º |
| Dump reach | 1060±50mm |
| Departure angle | 30º |
| Digging depth | 40mm |
| Tread width | 2150mm±10mm |
| Width over tires | 2745 mm±50mm |
| Maximum Steering angle | 35º |
| Turning radius outside bucket | 7350mm |
| Turning radius outside tires | 6700mm |
| Engine | Cummins 6.7 |
| Type | 4-cycle, turbocharged, electrical controlled diesel engine |
| Rated power | 164kW |
| Peak torque | 949N.m |
| Displacement | 6.7L |
| Cylinder-BorexStock | 6-105×120mm |
| Aspiration | Turbocharged and air cooler |
| Transmission | ZF4WG200 |
| Type | Counter shaft-type power shift, semi-automatic electrical hydraulic shift control |
| Converter | Single-stage, singe-phase, three elements torque converter |
| Travel Speeds (km/h) | |
| Forward | |
| Gear 1 | 5.9 |
| Gear 2 | 10.7 |
| Gear 3 | 22.5 |
| Gear 4 | 36 |
| Reverse | |
| Gear 1 | 5.9 |
| Gear 2 | 10.7 |
| Gear 3 | 22.5 |
| Steering | Load sensing full hydraulic steering |
| Axles | Wet brakes |
| Brakes | |
| Service brakes | Full hydraulic service braking and full enclosed wet brakes |
| Parking brakes | Spring applied and hydraulic release caliper-brake |
| Emergency brakes | Using parking brake, the brake will automatically/manually apply. Equipped with braking low pressure warning |
| Hydraulic system | |
| Relief valve setting | 17.5Mpa |
| Hydraulic cycle time, rated load in bucket | 11.8s |
| Raise | 6.5s |
| Dump | 3.7s |
| Lower (empty) | 1.6s |
| Tires | 23.5-25-20PR(TL) |
| Equipment | |
| Standard | Cummins QSB6.7 |
| ZF4WG200 | |
| Distributing valve | |
| Pilot control valve | |
| Working pump | |
| Bucket Positioner -Tilt adjustment | |
| Bucket Lift kickout | |
| Rops/Fops cab | |
| General purpose bucket | |
| Pilot control | |
| Wet brakes | |
| Brake control valve | |
| Air conditioner | |
| Backup alarm | |
| Emergency steering power unit | |
| Optional | |
| Centralized automatic lubricating system | |
| Side dump bucket | |
| Rock bucket | |
| Log fork | |
| Steel tube fork | |
| Light material bucket | |
| Ride control | |
| Dimensions with Bucket | |
| Overall length | 8180±100mm |
| Overall width | 3000±30mm |
| Overall height | 3540±50mm |
